128
4.
(5)
1.
2.
3.
(1)
(2)
(4)
Accurate Stitch Regulator Function/A.S.R. Foot
Holder
The A.S.R. foot holder (Accurate Stitch Regulator foot
holder) reacts to movement of the fabric and provides the
same stitch length for free motion, ruler work or variable
zigzag.
1.
Remove the foot holder (refer to page 30).
Attach the A.S.R. foot holder to the presser bar.
(1) A.S.R. foot holder
Tighten the thumbscrew with your ngers.
(2) Thumbscrew
2.
Tighten the thumbscrew securely with the
screwdriver.
4.
Press “Free Motion”.
(5) Free Motion
Drop the feed dogs (refer to page 34).
5.
Press “Straight Stitch 3”, “Straight Stitch 4” or “Zigzag
Stitch 2”.
Press the A.S.R. key.
(6) A.S.R. key
3.
Insert the A.S.R. plug into the attachment connector
on the rear of the machine.
(3) A.S.R. plug
(4) Attachment connector
(6)
5.
NOTE:
• Patterns not suitable for Accurate Stitch Regulator
function are grayed out.
• The A.S.R.key will gray out if the A.S.R.plug is not
inserted to the attachment connector.
(3)
To Next Page
Loading...
