140
(4)
Standby Timer
The sewing lights will turn off and the machine will enter
standby mode if you do not use the machine within the
time period set by this timer. Doing any operation will turn
the lights and screen on again.
The standby timer can be set from 1 to 30 minutes.
If you wish to turn off the timer, press and hold the “+” key
until “OFF” shows in the timer window.
(5) Auto-off (Time Setting)
The machine will be automatically turned off if you do not
use it within the time period set by this timer.
The “Auto-off (Time Setting)” can be set from 1 to 12
hours.
If you wish to turn off the timer, press and hold the “+” key
until “OFF” shows in the timer window.
To turn on the machine again, turn the power switch on.
(1)
(2)
(3)
Machine Setting Mode
(1) Buzzer Sound
The signal sound can be adjusted by pressing the “+” or “–”
key.
Set the value to “OFF” by pressing the “–” key several
times to mute the signal sounds.
(2) Screen Brightness
You can adjust the brightness of the visual touch screen
by pressing the “+” or “–” key.
(3) inch/mm
You can set your machine’s dimensional unit to either
inches or millimeters by pressing the “inch” or “mm” key.
The default unit is millimeters.
Press the next page key to show the next menu.
(4)
(5)
NOTE:
The auto-off timer is available in EU countries and
some regions which use 200 - 240 voltage standards.
Press the next page key to show the next menu.
To Next Page
Loading...
