93
Adjustment of Tapered Stitches
You can adjust the shape of the tapered stitch pattern.
Press the tapering adjustment key.
The tapering adjustment window will open.
(1)
Tapering adjustment key
(4)
(5)
(1)
(2)
(3)
(6)
(7)
(8)
Tapering shape
Select the shape of the tapering for the beginning and
the end of the stitch patterns by pressing the tapering
shape keys.
The keys on the top are for start tapering pattern.
The keys on the bottom are for end tapering pattern.
(2) Tapering shape keys (for start tapering pattern)
(3) Tapering shape keys (for end tapering pattern)
(4) Start tapering pattern
(5) End tapering pattern
The numbers in the tapering shape keys indicate the
degree of tapering. You can apply the tapering alignment
from left, center, right or off. The start and end of the
stitch patterns can be aligned separately.
The shape of the selected tapering pattern will be
displayed on the left side of each column.
The upper column shows the start tapering pattern.
The middle column shows the pattern body.
The lower column shows the end tapering pattern.
(6) Start tapering pattern
(7) Pattern body
(8) End tapering pattern
To Next Page
Loading...
