133
M R
Applique
There are 6 types of applique stitches available in this
section.
You can select the needle stop position to be either up or
down by pressing the needle stop position key.
(1)
Needle stop position key
The letter on the stitch image denotes the baseline of the
needle drop position.
M: Middle (center)
R: Right
Press the setting bar to expand the manual setting
window.
(2)
Setting bar
The baseline can be adjusted without changing the stitch
width by pressing the “+” or “–” key.
(3)
Needle drop position
Pivoting at applique corners
When sewing an applique with sharp corners, you may
turn on the “Foot up for pivoting” option so that the
presser foot automatically goes up when the machine
stops.
Press the foot-up key to turn on this option.
(4) Foot-up key
(1)
NOTE:
Make sure to stop the machine with the needle
dropped at the outer edge of the applique.
(4)
(3)
(2)
To Next Page
Loading...
