147
Language Setting Mode
Select the desired language and press the OK key.
The visual touch screen shows messages in the selected
language.
Correcting Distorted Stitch Patterns
Sewing results of the stitch patterns may vary depending
upon sewing conditions, such as sewing speed, type of
the fabric, number of layers, etc.
Always test sew on an extra piece of the fabric that you
wish to use.
If decorative stitch patterns, monogram or the stretch
buttonhole are distorted, correct them with the feed
balancing dial.
(1) Feed balancing dial
(2) Neutral position
Stretch stitch pattern (Q24)
If the pattern is compressed, turn the feed balancing dial
in the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
Letters and numbers
If the pattern is compressed, turn the feed balancing dial
in the direction of “+”.
If the pattern is drawn out, turn the feed balancing dial in
the direction of “–”.
Stitch balance of the stretch buttonholes (B8)
If the right row is denser, turn the dial in the direction of “+”.
If the left row is denser, turn the dial in the direction of “–”.
NOTE:
Return the feed balancing dial to its neutral position
when sewing is nished.
+ –
+ –
+ –
(1)
(2)
To Next Page
Loading...
