EasyManua.ls Logo

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Other Buttonholes

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
65
Other Buttonholes
B3, B4 Round end and ne fabric buttonholes
The sewing procedure is the same as that of B1 square
(sensor) buttonhole (refer to pages 58-60).
B5-B7 Keyhole buttonholes
The sewing procedure is the same as B1 square (sensor)
buttonhole (refer to pages 58-60).
Use a punch to open the keyhole buttonhole.
B8, B10 Stretch and Antique buttonholes
The sewing procedure is the same as B1 square (sensor)
buttonhole (refer to pages 58-60).
The sewing steps are as shown.
B9 Knit buttonhole
The sewing procedure is the same as B1 square (sensor)
buttonhole (refer to pages 58-60).
NOTE:
The opening width is adjustable from 0.2 to 2.0.
The buttonhole width is adjustable from 2.6 to 9.0.
The stitch density is adjustable from 0.20 to 1.00.
NOTE:
A punch is not included with this machine.
The opening width (1) is adjustable from 0.2 to 2.0.
The buttonhole width is adjustable from 5.6 to 9.0.
The stitch density is adjustable from 0.20 to 1.00.
NOTE:
The opening width is adjustable from 0.2 to 2.0.
The buttonhole width is adjustable from 2.6 to 9.0.
The stitch density is adjustable from 0.50 to 1.00 (B8),
and from 0.50 to 2.50 (B10).
NOTE:
The opening width is adjustable from 0.2 to 2.0.
The buttonhole width is adjustable from 2.6 to 9.0.
The stitch density is adjustable from 0.70 to 1.20.
(1)

Table of Contents

Related product manuals