64
To sew another buttonhole in a different size press
the X key on the dialog box.
3.
Start sewing again, and the machine sews the front
bartack and right side of the buttonhole.
Stop the machine when you reach the ending point.
Then press the reverse button.
(1) Reverse button
4.
Start sewing again, and machine sews the back
bartack and locking stitches then stops automatically
with the needle in the up position.
When the buttonhole is nished, a message will
appear.
To make the next buttonhole, position the fabric and
start sewing again. The message disappears and the
machine sews another buttonhole identical to the rst
one then stops automatically.
3.
4.
NOTE:
• To cut the buttonhole opening, refer to the
instructions on page 60.
• The memorized length will be cancelled if the
presser foot is raised or the startover key (refer to
page 88) is pressed before buttonhole is completed.
(1)
To Next Page
Loading...
