EasyManua.ls Logo

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Basting; Buttonhole

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
120
Basting
There are 2 basting stitches available in this section.
NOTE:
Refer to page 31 for how to attach the darning foot
PD-H.
Basting (Auto)
This stitch is used for basting zipper tape or tting of
garments.
Sew in the same way as that for straight stitch sewing.
Basting (Manual/Quilting)
Attach the darning foot PD-H.
Drop the feed dogs (refer to page 34).
To sew:
Hold the fabric taut and depress the foot control.
The machine will sew one stitch and stop automatically.
Slide the fabric to the rear for the next stitch.
Buttonhole
Please refer to pages 57-70 for “BUTTONHOLES AND
SPECIALTY STITCHES”.
Medium/Heavy fabrics
Please refer to pages 58-61 for “B1 Sensor (Square)
buttonhole”.
Fine/Medium fabrics
Please refer to page 65 for “B3 Round end buttonhole”.
Fine fabrics
Please refer to page 65 for “B4 Fine fabric buttonhole”.
Heavy fabrics
Please refer to page 65 for “B5 Keyhole buttonhole”.
Knit fabrics
Please refer to page 65 for “B9 Knit buttonhole”.
Antique style
Please refer to page 65 for “B10 Antique buttonhole”.

Table of Contents

Related product manuals