25
5.
While holding the thread at the spool, rmly draw the
thread up and to the back of the take-up lever. Draw
the thread forward to slip it into the eye of the take-up
lever.
(8) Eye of the take-up lever
6.
Then pull the thread down along the left channel and
through the lower thread guide.
(9) Lower thread guide
7.
Slide the thread from the right of the needle bar
thread guide to the left.
(10) Needle bar thread guide
8.
Thread the needle with the needle threader (refer to
the next page).
(9)
(10)
6. 7.
5.
(8)
Example
(1)
Guide Sticker for Threading
There is a threading guide sticker in the standard
accessories. If you wish, you can attach the sticker on
the machine to check the threading procedure.
(1) Threading guide sticker
To Next Page
Loading...
