EasyManua.ls Logo

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Mirror Image and Editing Patterns

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
83
(2)
Twin Needle Sewing
Some of the utility stitches and decorative stitches can
be sewn with a twin needle.
Press the twin needle key and select the desired pattern.
Patterns not suitable for twin needle sewing cannot be
selected (pattern selection keys are grayed out).
Buttonholes, specialty stitches, monogram and tapering
cannot be selected.
(1) Twin needle key
CAUTION:
Press the lockout key before changing the needle.
Do not use twin needles other than the ones
included in the standard accessories, otherwise the
needle may hit the needle plate, foot or hook and
break.
(2) Lockout key
(1)
NOTE:
When you sew patterns with the twin needle, test the
stitches rst before you sew on the garment.
Use zigzag foot A or satin stitch foot F for twin
needle sewing.
Use the threads #60 or ner.
When changing the sewing direction, raise the
needle and presser foot then turn the fabric (foot
up for pivoting option is not available when the twin
needle is selected).
Use the thread cutter on the face plate when cutting
threads.
Replace the needle with the twin needle supplied with
the standard accessories (refer to page 28).

Table of Contents

Related product manuals