111
(A
)
(B
)
(1)
(2)
(3)
(4)
(3)
(6)
(5)
To sew:
Attach blind hemming foot G.
Fold the fabric to form a hem leaving a 0.5 cm (1/4˝)
allowance as shown.
(3) 0.5 cm (1/4˝)
(A)
Medium to heavy fabrics: The raw edge should be
overcasted.
(B)
Fine fabrics: Fold the raw edge 1 cm (3/8˝).
(4) 1 cm (3/8˝)
Position the fabric so that the fold comes to the left side
of the guide on the foot. Lower the presser foot.
The needle should just pierce the folded edge when it
comes over to the left side.
Adjust the position of the needle drop if necessary.
Sew guiding the fold along the guide.
(5) Fold
(6) Guide
(7) Wrong side of the fabric
Blind Hem
Select “Blind Hem”.
The following 2 options are available.
(1) Woven
For blind hemming regular woven fabric.
(2) Stretch/Knit
For blind hemming stretch or knit fabric.
After sewing is nished, open the fabric at.
The seam on the right side of the fabric is almost
invisible.
(7) Wrong side of the fabric
(8) Right side of the fabric
(7)
(7)
(8)
To Next Page
Loading...
