Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Page 114

112
(3)
(2)
2.8 mm
NOTE:
You can alter the stitch width by changing the right
needle drop position.
(1)
(4)
(3)
(2)
Altering blind hem stitch width
Press the “+” key in (2) to increase stitch width (3).
Press the “–” key in (2) to decrease stitch width (3).
NOTE:
You can move the left needle drop position (4) with the
“+” or “–” key in (1).
Adjusting the needle drop position
Press the setting bar to expand the manual setting
window.
(1)
Setting bar
Press the “+” key to move the needle drop positions to
the left.
Press the “–” key to move the needle drop positions to
the right.
(2)
“+” key
(3) “–” key
The needle drop position will change, while the stitch
width (2.8 mm) remains consistent.
The distance between the left needle drop position and
guide of the foot is indicated in millimeters.
(1)