123
Eyelet
Eyelets are used for belt holes, etc.
Attach satin stitch foot F.
(1)
To sew:
Place the garment under the foot and lower the needle to
the starting point.
Sew until the machine stops automatically.
(1) Starting point
Open the eyelet with an awl, punch or pointed scissors.
NOTE:
The shape can be adjusted within S1 to S3 (default
setting is S2).
To correct the shape of an eyelet:
If the eyelet is open, turn the stitch width adjusting dial
counterclockwise or press the “–” key.
If the eyelet overlaps, turn the stitch width adjusting dial
clockwise or press the “+” key.
To Next Page
Loading...
