47
(1)
Floating Mode
You can decrease layer slippage and wrinkles by lifting
the presser foot slightly in the oating mode.
1.
Press the oating mode key.
(1) Floating mode key
3.
Press “+” or “–” to adjust the presser foot height.
(3) Presser foot hight adjustment
Press “+” to increase the presser foot height.
Press “–” to decrease the presser foot height.
NOTE:
• When using the oating mode, always adjust the
presser foot height and conduct a test sew on an
extra piece of the fabric before actual sewing.
• Using the dual feed foot is recommended to
decrease layer slippage when the oating mode
does not work.
1. 2.
3.
(2)
(3)
NOTE:
Patterns not suitable for oating mode are grayed out.
2.
Press the setting bar to expand the manual setting
window.
(2) Setting bar
To Next Page
Loading...
