EasyManua.ls Logo

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Threading the Machine and Bobbin

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
19
(2)
(5)
Raising and Lowering the Presser Foot
(1)
NOTE:
The presser foot cannot be lowered with the presser
foot lifter if the foot was raised with the presser foot
lifter button.
CAUTION:
Do not turn the handwheel or press the needle up/
down button when the presser foot is in extra lifted
position. This may cause damage to the presser foot.
The presser foot lifter button, the presser foot lifter or the
knee lifter raises and lowers the presser foot.
You can raise the presser foot about 6 mm (1/4˝) higher
than the normal up position by exerting more pressure
when lifting the presser foot lifter or knee lifter. This helps
you to place layers of thick fabric.
(1) Presser foot lifter button
(2) Presser foot lifter
(3) Presser foot
(4) Up position
(5) Extra lifted position
(6) Down position
(2)
(3)
(6)
(4)

Table of Contents

Related product manuals