52
(−) (+)
(−) (+)
NOTE:
• The adjustable range for patterns U1-U6 and U9-
U11 is 0.0 to 5.0.
• The adjustable range for pattern U7 is 1.0 to 5.0.
Altering stitch length
Turn the stitch length adjusting dial clockwise to increase
the stitch length.
Turn the stitch length adjusting dial counterclockwise to
decrease the stitch length.
You can also change the setting with the “+” or “–” key.
Press the “+” key to increase the stitch length.
Press the “–” key to decrease the stitch length.
(+)
(−)
(+)
(−)
(1) (2)
Adjusting Thread Tension
This machine is equipped with automatic thread tension
control, which optimizes the tension balance for the
selected stitch pattern.
Balanced thread tension
Straight stitch:
Both needle and bobbin threads
interlock between the layers.
Zigzag stitch:
The needle thread appears slightly on the
wrong side of the fabric.
However you may need to manually adjust the tension
balance depending on the sewing conditions, or you can
ne-tune the thread tension to suit your preference.
(1) Press the “+” key if the tension is too loose.
(2) Press the “–” key if the tension is too tight.
To Next Page
Loading...
