EasyManua.ls Logo

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL - Page 117

Janome HORIZON Memory Craft 9480 QC PROFESSIONAL
164 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
115
Sew Left side
Replace the foot with zipper foot E.
Fold back the left seam allowance. Turn the right seam
allowance under to form a 0.2 cm to 0.3 cm (1/8˝) fold.
Place the zipper teeth next to the fold and pin in place.
(6) 0.2 cm - 0.3 cm (1/8˝)
(7) Zipper teeth
(8) Fold
Lower the foot onto the topside at the bottom of the
zipper so that the needle pierces the fabric next to the
fold and the zipper tape.
Sew along the zipper guiding the zipper teeth along the
bottom edge of the foot.
Sew through all layers next to the fold.
Stop 5 cm (2˝) before zipper foot E reaches the slider on
the zipper tape.
(9) 5 cm (2˝)
Lower the needle into the fabric, raise the foot and open
the zipper. Lower the foot and stitch the remainder of the
seam.
Close the zipper and spread the fabric open at with the
right side of the fabric facing up.
(6)
(7)
(8)
(9)
Opening size

Table of Contents

Related product manuals