29
VM9424
Accessing an SD Card
1. Locate the SD connector (7) on the front of the radio.
2. Insert the SD card into the SD connector.
3. Press he SRC button (10) on the front panel or touch the top left corner of
the screen to access the Source menu, and then touch he “SD” icon. You
can also press the SRC button (8) on the remote control until “Media-SD”
appears at the top of the screen.
Before removing he SD card, change the radio to another source. To remove,
press the edge of the card and release to disengage. Pull straight out to
remove.
/ SRC
Press Audio
VOL Mute
AV N
Mu timed a Receiver
To Next Page
Loading...
