Johnson Controls YORK YMC2 User Manual

Table 50: Programmable
Button Access Description
Standard Week Start/
Stop Times
Operator
For each day of the week, the user may specify a time for the
chiller to start and a time for the chiller to stop. The times
specified in this entry week will be used as the default for
every week of chiller operation.
Exception Start/Stop
Times
Operator
For each day of the week, the user may specify a time for the
chiller to start and a time for the chiller to stop. These Start /
Stop combinations may be scheduled up to five (5) weeks in
advance and also for the present week. As each week goes
by, the new schedule will be created for the present week
using the Exception specification in combination with the
Standard week definition, as described above.
Schedule (Enabled /
Disabled)
Operator
Allows the user to enable or disable the monitoring function
which enforces the scheduled starting and stopping of the
chiller.
Repeat Sunday
Schedule
Operator
Duplicates the schedule defined for Sunday for the
remainder of the standard weekdays.
Reset All Exception
Days
Operator
Deletes all programming for exception days within the next 6
weeks.
Select Operator
Places a selection box around a start time for a given day.
Use ◄ , ► , ▲ or ▼ cursor buttons to place the box around
the desired start or stop time for a given day.
Print Generates a Schedule print report.
Table 51: Navigation
Button Description
Home Causes an instant return to the Home Screen.
Setup Return to the previous Setup Screen.
YMC
2
Mod B with OptiView
™
Control Center
78

Johnson Controls YORK YMC2 Specifications

General

Brand	Johnson Controls
Model	YORK YMC2
Category	Chiller
Language	English