Sales order screen
Figure 31: Sales order screen
This screen allows definition of the sales order parameters. The Commissioning date is entered by
the YORK/Johnson Controls service technician at the time of chiller commissioning. These values
should never be changed or entered by anyone other than a qualified service technician. Entry
instructions are included in the YORK YMC
2
Service Manual (Form 160.84-M2). The remainder of the
values are entered at the YORK Factory during the manufacturing of the chiller.
Table 59: Display only fields
Field/LED name Description
Model Number Factory defined model number of the chiller system.
YORK Order Number Factory defined order number under which the chiller was sold.
Chiller Serial Number Factory defined serial number for the chiller system.
Compressor Model
Factory defined model number of the Compressor. Critical entry for
correct Chiller Operation. Technicians see YORK YMC
2
Service Manual (Form
160.84-M2).
Evaporator Model Factory defined model number of the Evaporator.
Condenser Model Factory defined model number of the Condenser.
VSD Model Factory defined model number of the VSD.
Condenser and
Evaporator Design
Load Information
Factory defined description of the condenser and evaporator parameters
according to the original rating.
Nameplate Information Factory defined information about the chiller configuration.
Commissioning Date Define the date at which the chiller was commissioned.
Job Name and Location Factory defined job name and location the chiller is destined for.
YMC
2
Mod B with OptiView
™
Control Center
84
To Next Page
Loading...
