Custom screen
Figure 35: Custom screen
This screen allows up to 10 service technician selected parameters to be displayed. These
parameters are selected from a list on the Custom View Setup Screen. This allows the service
technician to display parameters pertinent to a particular problem during troubleshooting. At
completion of the service call, the display can be cleared or the parameters can be left there for
monitoring by operations personnel.
This screen display attributes assigned to Custom screen. There are no other display options.
Table 71: Programmable
Button Access Description
Print Operator
This generates a listing of the parameters displayed on this
screen.
Table 72: Navigation
Button Description
Home Causes an instant return to the Home Screen.
History Causes an instant return to the History Screen.
Setup
Access Level Required: Operator
Causes a jump to the subscreen that allows selection of the parameters
to be displayed.
YMC
2
Mod B with OptiView
™
Control Center
90
To Next Page
Loading...
Need help?
General
