Table 74: Programmable
Button Access Description
Page Up Scroll up through list of available parameters.
Page Down Scroll down through list of available parameters.
Select
First use the Page Up and Page Down keys to scroll
through the Slot Numbers list and note the number of the
parameter(s) to be displayed. Pressing the Select key places
a green colored selection box around Custom Slot 1. If it is
desired to change an already entered parameter, use the
5 and 6 buttons to place the selection box around the slot
number to be changed. With the selection box around the
slot number to be changed or entered, press the ENTER
(tick) button. A dialog box is displayed permitting data
entry. Using the numeric keypad keys, enter the desired slot
number and press the ENTER (tick) button.
Custom Slot (1-10)
Use the Select key and numeric keypad buttons as described
above and enter the slot number from Slot Numbers list.
Setting the Slot number to zero clears the display of this slot
number.
Table 75: Navigation
Button Description
Home Causes a return to the Home Screen.
Custom View
Access Level Required: service
Causes a return to the Custom View Screen.
YMC
2
Mod B with OptiView
™
Control Center
92
To Next Page
Loading...
Need help?
General
