MANUAL button: This button selects the mode in the following order: AUTO,
FORCED COOL, OFF.
FORCED COOL mode: In FORCED COOL mode, the Operation light flashes. The
system will then turn to AUTO after it has cooled with a high wind speed for 30
minutes. The remote control will be disabled during this operation.
OFF mode: When the display panel is turned OFF, the unit turns off and the
remote control is re-enabled.
Operating temperature
When your air conditioner is used outside of the following temperature ranges,
certain safety protection features may activate and cause the unit to disable.
COOL mode HEAT mode DRY mode
Room
Temperature
17°C - 32°C
(62°F - 90°F)
0°C - 30°C
(32°F - 86°F)
10°C - 32°C
(50°F - 90°F)
Outdoor
Temperature
0°C - 50°C
(32°F - 122°F)
-15°C - 24°
C (5°F -
75°F)
0°C - 50°C
(32°F - 122°F)
0°C - 52°C
(32°F - 126°F)
(For special
tropical
models)
0°C - 52°C
(32°F - 126°F)
(For special
tropical
models)
-15°C - 50°C
(5°F - 122°F)
(For models
with low
temp. cooling
systems.)
Inverter Split Type
FOR OUTDOOR UNITS
WITH AUXILIARY
ELECTRIC HEATER
When outside
temperature is
below 0°C (32°F ),
we strongly
recommend
keeping the unit
plugged in at all
time to ensure
smooth ongoing
performance.
Display panel
Infrared
receiver
Timer
indicator
Alarm
indicator
PRE-DEF
(pre-heating/defrost) indicator
Manual
button
Operation
indicator
LED display
To Next Page
Loading...
