Operation
51
<
Replaying a Recorded Image
You can display a recorded image, which appears in the right-hand side of
the screen. No menus and graphs can be displayed while a recorded image is
being replayed.
To replay a recorded image, follow these steps:
1.
Press the
PLAY
key to call up the REPLAY PICTURE menu.
2.
An image has been recorded at the number marked by an asterisk (*).
Press the
SHIFT
▼
or
RANGE
▼
key to move to the number of your choosing.
3.
Press the
key to replay the image. For about 7 seconds
immediately after the display, various information displays at the
lower left corner to represent the status of the image replayed.
Data Window
4.
Press the
PLAY
key to cancel the replay and return to the regular
fishfinding display.
STD/STD
･･･Display mode
IR-1
･･･Interference suppression level
60.2ｍ
･･･Depth Unit
15.0℃
･･･Water temperature
SPD
1/2
･･･Scroll speed
N 35ﾟ48.000
’
･･･Latitude （displays as “0” if external input is not used）
E134ﾟ51.000
’
･･･Longitude （displays as “0” if external input is not used）
AUTO
･･･” AUTO” appears only if auto-ranging is used.
REPLAY PICTURE
１ ２
＊
PLAY
:
RETURN TO F/F
:
PLAY BACK PICTURE
REPLAY PICTURE Menu
To Next Page
Loading...
Need help?
General
