JRC JFC-130 - Basic Operations; Turning the Power on and off ([POWER] Switch); Adjusting Brightness ([Brightness] Control); Day; Night

Operation
13
3.2 Basic Operations
Turning the Power On and Off ([POWER] switch)
When turning on the power, be sure not to
press any operator panel key at the same
time. Alternates to the hardware
configuration of the until could cause the unit
to malfunction.
Turn the
［
POWER
］
control clockwise to turn on the power. Turn it
counterclockwise to the OFF position to turn off the power.
Adjusting Brightness ([Brightness] control)
Turn the [BRIGHTNESS] control on the display unit to adjust brightness.
Brightness can he raised from level 0 up to level 10.
Switching Brightness between Day and Night (
DAY/
NIGH
T
key)
Press the
DAY/
NIGH
T
key to switch brightness between day and night. The key
toggles each time you press it.
Selecting Display Modes([MODE] switch)
Set the
［
MODE
］
switch to the mode of your choosing.