JRC JFC-130 - Resetting to Prerecorded Settings; Custom; Key); Recording Settings

Operation
1
7
Resetting to Prerecorded Settings (
CUSTOM
key)
When you have inadvertently performed an incorrect operation or made an
invalid setting, you can easily reset them to their original status (prerecorded
setting).
To reset to prerecorded settings, follow these steps:
1.
Press the
CUSTOM
key to call up the CUSTOM MENU.
2.
Using the
or key, move to the number to reset.
3.
Press the
MARK
key to reset the operating status of the sounder (control
settings, and all setup values, except for the
A
SCP ,
DAY/
NIGH
T
, and
GRAPH
keys) to its prerecorded settings. Then, the CUSTOM MENU will exit
automatically to the fishfinding display.
If you have not yet pressed the
MARK
key, you can press the
CUST OM
key to cancel the custom operation and return to the fishfinding
display.
Recording Settings (
CUSTOM
key)
You can have up to three patterns of the current operating status of the
sounder (control settings, and all setup values, except for the
A
SCP ,
DAY/
NIGH
T
,
and
GRAPH
keys) recorded. With settings prerecorded, you can easily reset the
operating status of the sounder to its prerecorded values at any time.
To record settings, follow these steps:
1.
Set the range, shift, and menu values as desired beforehand.
2.
Press the
CUSTOM
key twice to call up the RECORD MENU.
3.
Using the
or key, move to the number to record.
4.
Press the
MARK
key to complete storage. Then, the RECORD MENU
will exit automatically to the fishfinding display.
If three patterns of the current operating status of the sounder
have already been recorded, choose any of the numbers 1 to 3 to
overwrite the existing settings.
When the regular settings have been established after the
completion of a test run, etc., store them under number 2.
Whenever you have made alterations to any of the main menu or
fishfinding menu settings, be sure to record the alterations.
The A-scope, day/night, graphs, STC, gain and interference
rejection are not restored.
CUSTOM MENU
1 ２ ３
MARK : RETURN TO CUSTOM SETTINGS
CUSTOM : GO TO RECORD MENU
CUSTOM MENU
RECORD MENU
1 2 3
MARK : RECORD CUSTOM SETTINGS
CUSTOM : RETURN TO F/F
RECORD MENU