EMC Installation & Service Guidelines
viii
Servicing
· JRC equipment should be serviced only by authorized JRC service engineers. They will ensure that service
procedures and replacement parts used will not affect performance. There are not user serviceable parts in
any JRC product.
· Always report any EMC related problem to your nearest JRC dealer. We will use any such information to
improve our quality standards.
Safety
· Some products generate high voltages, and so never handle the cables/connectors when power is being
supplied to the equipment.
Suppression Ferrites
The following illustration shows the range of suppression ferrites fitted to JRC equipment.
If your JRC equipment is going to be connected to other equipment using a cable not supplied by JRC, a suppression
ferrite MUST always be fitted to the cable close to the JRC unit.
To Next Page
Loading...
Need help?
General
