Chapter 4 ADJUST MENU SETTINGS
4.11 MAINTENANCE
4-73
4
NSTALLATION MANUAL
Scanner Running Time
Initializes the scanner operating time.
1 Open Scanner Time Clear - Scanner Time Clear .
Yes : Clears the scanner operating time.
No : Does not clear.
Scanner Transmit Time
Initializes the scanner transmit time.
Initialize the transmit time as shown below when magnetron is replaced.
1 Open Scanner Time Clear - TX Time Clear .
Yes : Clears the scanner transmit time.
No : Does not clear.
When "Yes" is selected, the transmit time stored in the scanner internal control
circuit is initialized to "0".
To Next Page
Loading...
