JUKI DDL-9000C-S Series - Use a Check Program Function.（Ddl-9000 C-F

4) Use a check program function.
（
DDL-9000C-F
）
① No.01 Selection of a machine head
When you press the ❾ in the ma-
chine head selection screen to select the
model, it will be nalized model.
② No.02 Z-phase adjustment .................................... Refer to "3-.(7)-1) Z-phase adjustment of a main
motor"
③ No.03 Adjustment of a presser lifter motor ............ Refer to "3-.(7)-2) Adjustment of the origin of a presser
lifter motor"
④ No.04 Pitch motor adjustment .............................. Refer to "3-.(7)-3) Pitch motor adjustment"
⑤ No.05 Vertical feed motor adjustment ................. Refer to "3-.(7)-4) Vertical feed motor adjustment"
⑥ No.06 Vertical feed link adjustment ..................... Refer to "3-.(7)-5) Vertical feed link adjustment"
⑦ No.07 Active tension ..................................................Refer to "3-.(7)-7) Adjustment of active tension (only
the DDL-9000C-F)"
No. Machine type Display
01
For Standard materials (For general export)
DDL-9000C FMS
02
For heavy-weight materials(For general export)
DDL-9000C FMH
03
For Standard materials (For CE)
DDL-9000C FMS CE
04
For heavy-weight materials (For CE)
DDL-9000C FMH CE
❾
– 93 –