2) How to assign a function to a key
① Displaying the key customization mode list screen
❶
1. Press ❶.
The "mode screen" is displayed.
2. Press and select the "10. Setting
the key customization".
The "key customization mode list screen" is
displayed.
② Setting the key customization
1. Select "1.Pattern sewing under the op-
erator mode". Then, "key customization
assignment screen (operator mode)" is
displayed.
2. Select "2.Pattern sewing under the ser-
viceperson mode". Then, "key customi-
zation assignment screen (Maintenance
personnel mode)" is displayed.
3. Select "3.Cycle sewing". Then, "key cus-
tomization assignment screen (Cycle
mode)" is displayed.
– 99 –
To Next Page
Loading...
