JUKI DDL-9000C-S Series - Control Panel Functions (DDL-9000 C-F)

Switch/display Description
❶
Mode key This switch is used for displaying the menu screen.
・The user level is displayed by operating this key in the normal manner.
・The serviceperson level 1 is displayed by keeping the key held pressed for three sec-
onds.
・The serviceperson level 2 is displayed by keeping the key held pressed for six seconds.
❷
Information key This switch is used for displaying the information screen.
・The user level is displayed by operating this key in the normal manner.
・The serviceperson level is displayed by keeping the key held pressed for three seconds.
❸
Touch panel
section
Each screen will be displayed. Press the key in the screen to operate the panel.
2) DDL-9000C-F
❶
❷
❸
* Conrmation of data
To change the pattern number, press Sewing pattern No. button ❹.
Select the sewing pattern you want to use. Then, press to conrm your choice.
For the setting items of the Memory switch or sewing pattern, change the target data and press to
conrm the change.
After the setting data on the number of stitches of reverse-feed stitching or the number of stitches of
multi-layer stitching has been changed, the changed setting data is conrmed by pressing .
❹
– 77 –