2
）
Level 2
It can be set when a mode screen for the serviceperson level 1 or the serviceperson level 2 has been displayed.
No. Item Setting range Unit
Initial value
SMS SSH FMS FSH
SMS CE
SSH CS FMS CE FSH CE
K023
Presser device
0: Equipped/1: Non-equipped
0 to 1 - 0 0 0 0 0 0 0 0
K024
Reverse feed stitching speed (at end)
When the set value is 150, the set value of a memory
switch U008 becomes effective. Other than that, the val-
ue lower than that of the memory switch U008 becomes
effective.
150 to 3000 sti/min 150 150 150 150 150 150 150 150
K026
Operational settings of BTSW
0: Normal/1:Stopping double touch Hsw/2: Stopping
Hsw/3: Stopping Usw
0 to 3 - 0 0 0 0 0 0 0 0
K034
Number of needles for prohibited reverse feed
stitching (at end)
0: Prohibited and disabled
0 to 19 Stitch 2 2 2 2 2 2 2 2
K046
Function for lifting of a presser foot at the time of
power activation
0: OFF/1: ON
0 to 1 - 0 0 0 0 0 0 0 0
K050
Waiting time after lowering of a presser foot
Waiting time until a principal axis begins to start after
lowering of a presser foot
10 to 100 ms 40 40 40 40 40 40 40 40
K067
Speed correction for presser strength
Correct the presser strength with the sewing speed.
0: Without speed correction/1: With speed correction
0 to 1 - 0 0 0 0 0 0 0 0
K072
Function for selection of the rise of a sewing ma-
chine
0: Normal/1-400: Restriction on a rise
0 to 400 - 0 0 0 0 260 260 260 260
K086
Waiting time until the reverse-rotate needle-up starts
0 to 250 ms 100 100 100 100 100 100 100 100
– 111 –
To Next Page
Loading...
Need help?
General
