JUKI DDL-9000C-S Series - Page 126

No. Item Setting range Unit
Initial value
SMS SSH FMS FSH SMS CE SSH CS FMS CE FSH CE
U294
Thread-presser initial suction time
4 to 10 ms 8 8 8 8 8 8 8 8
U326
Feed dog travel to 0 position when lifting the presser foot
The feed dog height is set to 0 (zero) when lifting the presser
foot.
The material on the sewing machine can be handled with ease
when this function is used.
0: OFF / 1: ON
0 to 1 - 1 1 1 1 1 1 1 1
U400
Panel operation mode
This memory switch is used for specifying the mode of the
sewing screen that is displayed at the time of startup.
0: Maintenance personnel mode / 1: Operator mode
0 to 1 - 1 1 1 1 1 1 1 1
U401
Input unit of pitch
0: Pitch (mm) / 1: Number of stitches per inch
2: Number of stitches in 3 cm
0 to 2 - 0 0 0 0 0 0 0 0
U402
Automatic lock time
The sewing machine is automatically locked in the case the
operation panel is not operated for a predetermined period of
time.
0 to 300
Second
0 0 0 0 0 0 0 0
U403
Auto-OFF of back light
Back light of the panel is automatically turned off in the case the
operation panel is not operated for a certain period of time.
0 to 20 0 0 0 0 0 0 0 0 0
U404
Selection of part number and process / comment display
This memory switch is used for specifying either the part number/
process is displayed or comment is displayed on the sewing
screen.
0: Part number/process / 1: Comment
0 to 1 - 0 0 0 0 0 0 0 0
U406
Language selection
0: Not yet selected / 1: Japanese / 2: English / 3: Chinese
0 to 3 - 0 0 0 0 0 0 0 0
U407
Operating sound of panel
0: OFF / 1: ON
0 to 1 - 1 1 1 1 1 1 1 1
– 110 –