(2) To use the functions of the serviceperson level
1) DDL-9000C-S
By pressing ❾ button on the sewing screen for three seconds to display a mode screen for the
servisperson level 1 or for six seconds to display a mode screen for the servisperson level 2 respectively.
The function that can be used differs depending on the levels as follows.
01 Memory switch
02 Counter setting
03 Maintenance
04 Cycle pattern management
05 Custom pitch management
It can be used
at the operator
level.
06 Condensation custom management
07 Ver. display
08 Contrast setting
09 Communication
It can be used at the
serviceperson level 1.
10 USB format
11 Check program
12 Optional input/output settings
It can be used at the
serviceperson level 2.
13 Data initialization
14 Function restrict setting
– 78 –
To Next Page
Loading...
