JUKI IP-420 - Page 105

– 101 –
No. Item Setting range Edit unit
Intermediate presser with/without control
--- ---
Without
(Lowering xed)
With (Lowering with
sewing data at the time of
operation)
With (Lowering even at
the time of feed forward/
backward)
Intermediate presser lowering timing
--- ---
Immediately before start-up of
machine head
Synchronized
with the last
feeding frame
Intermediate presser : wiper sweeping position
--- ---
Sweeping above
intermediate presser
Sweeping above
intermediate presser
(position where
intermediate presser
lowers most)
Sweeping below
intermediate
presser
With/without air pressure detection
--- ---
Without With
Intermediate presser DOWN position setting
/
Refer to
"
!
-4-8. Intermediate presser height" p.22.
0 to 7.0mm 0.1
With/without needle cooler control
--- ---
Without With
Grease-up error
Clearing of number of stitches of grease-up is
performed.
/
Refer to
"
#
-1-12. Replenishing the
designated places with grease" p.122
.
--- ---
Language selection
Japanese English Chinese
(traditional)
Chinese
(simplied)
Spanish Italian French German
Portuguese Turkish Vietnamese Korean
Indonesian Russian