Juniper EX3200 Series User Manual

10. Replace the accessory box on top of the packing foam.
11. Close the top of the cardboard shipping box and seal it with packing tape.
12. Write the RMA number on the exterior of the box to ensure proper tracking.
Packing EX3200 or EX4200 Switch Components for Shipping
CAUTION: Do not stack switch components. Return individual components in separate
boxes if they do not fit together on one level in the shipping box.
To pack and ship switch components:
•
Place individual boards in antistatic bags.
•
Ensure that the components are adequately protected with packing materials and
packed so that the pieces are prevented from moving around inside the carton.
•
Close the top of the cardboard shipping box and seal it with packing tape.
•
Write the RMA number on the exterior of the box to ensure proper tracking.
Related Topics • Returning an EX3200 or EX4200 Switch or Component for Repair or Replacement on
page 199
• Removing a Fan Tray from an EX3200 or EX4200 Switch on page 176
• Removing a Power Supply from an EX3200 or EX4200 Switch on page 174
• Removing an Uplink Module from an EX3200 or EX4200 Switch on page 177
• Removing a Transceiver from an EX Series Switch on page 179
Copyright © 2010, Juniper Networks, Inc.204
Complete Hardware Guide for EX3200 and EX4200 Ethernet Switches

Juniper EX3200 Series Specifications

General

Model	EX3200 Series
Rack Units	1 U
Layer	Layer 2/3
Maximum VLANs	4094
Ports	24 or 48
Power Supply	AC or DC power supply options
Power Supply Voltage	100 to 240 VAC or -48 VDC
Operating Humidity	10% to 90% non-condensing
Uplink Ports	4 SFP or SFP+
Operating Temperature	32°F to 104°F (0°C to 40°C)