Juniper EX4200-24T - Chapter 28: Installation Safety Guidelines and Warnings; Installation Instructions Warning

Table 62: Chassis Component Alarm Conditions on EX4200
Switches (continued)
Remedy
Alarm
SeverityAlarm Condition
Chassis
Component
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Minor
(yellow)
Devicebootedfrom
backup root.
Media
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
/varor /config full
(only 10% free).
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Minor
(yellow)
/var or /config full
(only 25% free).
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
Upgrade bank is
empty or corrupted.
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Minor
(yellow)
Firmware version is
not the latest.
Open a support case using the Case Manager
link at http://www.juniper.net/support/
or call 1-888-314-5822 (toll-free within the
United States and Canada) or
1-408-745-9500 (from outside the United
States).
Major
(red)
Single-bitECC error
detected.
229Copyright © 2017, Juniper Networks, Inc.
Chapter 24: Alarms and Syslog Messages