Juniper EX9200 User Manual

Table 36: CLI Equivalents of Terms Used in Documentation for EX9208 Switches (continued)
Additional
Information
Item in
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
“Craft Interface in an
EX9200 Switch” on
page 20
Craft Interface–Front Panel DisplayFPM Board
•
AC Power Supply in
an EX9208 Switch
•
DC Power Supply in
an EX9208 Switch
AC or DC power supplyn is a value in the range of
0–3. The value corresponds
to the power supply slot
number.
One of the following:
•
PS 1.4-2.52 kW;
90-264 V AC in
•
DC 2.4 kW Power
Entry Module
PEM(n)
Routing Engine Module
in an EX9200 Switch
RE modulen is a value in the range 0–1.
In base configuration, only
one entry appears.
In redundant configuration,
two entries appear; one for
each Routing Engine module
(RE module) installed in the
chassis.
RE-S-EX9200-1800X4Routing
Engine (n)
Switch Fabric Module in
an EX9200 Switch
SF modulen is a value in the range of
0–1.
Multiple line items appear in
the CLI if more than one
Switch Fabric modules (SF
modules) are installed in the
chassis.
CB0 and CB1 stand for SF
modules.
EX9200-SCBECB (n)
•
EX9200-2C-8XS
Line Card on page 25
•
EX9200-4QS Line
Card on page 32
•
EX9200-6QS Line
Card on page 34
•
EX9200-MPC Line
Card on page 3
•
EX9200-32XS Line
Card on page 27
•
EX9200-40T Line
Card on page 31
•
EX9200-40F Line
Card on page 28
•
EX9200-40F-M Line
Card on page 30
Line card (The switch
does not have actual
FPCs—the line cards
are the FPC equivalents
on the switch.)
n is a value in the range of
0–5. The value corresponds
to the line card slot number
in which the line card is
installed.
Abbreviated name of the
line card
One of the following:
•
EX9200-2C-8XS
•
EX9200 4x40G QSFP
•
EX9200
24x10GE+6x40GE
•
EX9200-MPC
•
EX9200 32x10G SFP
•
EX9200 40x1G
Copper
•
EX9200-40x1G-SFP
•
EX9200-40FE
FPC (n)
89Copyright © 2016, Juniper Networks, Inc.
Chapter 4: Updated EX9208 Topics

Juniper EX9200 Specifications

General

Brand	Juniper
Model	EX9200
Category	Network Router
Language	English