Juniper EX9200

CHAPTER 1
New Topics
•
EX9200-MPC Line Card on page 3
•
Modular Interface Card LED in an EX9200 Switch on page 5
•
Installing a MIC in an EX9200-MPC Line Card on page 6
•
Removing a MIC from an EX9200-MPC Line Card on page 11
EX9200-MPC Line Card
The line cards in EX9200 switches combine a Packet Forwarding Engine and Ethernet
interfaces in a single assembly. Line cards are field-replaceable units (FRUs) that you
can install in the line card slots on the front of the switch chassis. Line cards are
hot-insertable and hot-removable: You can remove and replace them without powering
off the switch or disrupting switch functions. See Figure 1 on page 3.
This topic describes:
•
Line Card Models on page 3
•
Line Card Components on page 4
Line Card Models
Table 3 on page 4 shows the model number, description of the line card model, and the
Junos OS release in which the line card was first supported.
3Copyright © 2016, Juniper Networks, Inc.