Juniper EX9200 User Manual

Figure 35: EX9208 Switch with DC Power Supplies
You can mount an EX9208 switch on a standard 19-in. four-post rack or a standard
800-mm enclosed cabinet. You can mount up to six EX9208 switches in a standard (48
rack unit (U)) rack.
Related
Documentation
Rack Requirements for an EX9200 Switch•
• Cabinet Requirements for an EX9200 Switch
• Mounting an EX9200 Switch on a Rack or Cabinet Using a Mechanical Lift
• Installing and Removing EX9208 Switch Hardware Components
EX9208 Switch Hardware and CLI Terminology Mapping
This topic describes the hardware terms used in EX9208 switch documentation and the
corresponding terms used in the Junos OS CLI. See Table 36 on page 88.
Table 36: CLI Equivalents of Terms Used in Documentation for EX9208 Switches
Additional
Information
Item in
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
“Chassis Physical
Specifications of an
EX9208 Switch” on
page 85
Switch chassis–EX9208Chassis
Midplane in an EX9200
Switch
Switch midplane–EX9208-BPMidplane
Copyright © 2016, Juniper Networks, Inc.88
Hardware Topics for Aloha Line Card

Juniper EX9200 Specifications

General

Brand	Juniper
Model	EX9200
Category	Network Router
Language	English