Juniper EX9200

Table 13: EX9200-2C-8XS Line Card
Junos OS
Release
RequiredDescriptionModel
13.2R1 or laterA line card with two 100-Gigabit Ethernet C form-factor
pluggable (CFP) ports , each of which can house
100-gigabit C form-factor pluggable (CFP) transceivers
and eight 10-Gigabit Ethernet small form-factor
pluggable plus (SFP+) ports, each of which can house
10-gigabit small form-factor pluggable plus (SFP+)
transceivers
EX9200-2C-8XS
See Figure 15 on page 26
Figure 15: EX9200-2C-8XS Line Card
4—1— CFP portsEjector levers
5—2— LEDs for CFP portsLine card LED
6—3— SFP+ portsLEDs for SFP+ ports
You can use the show version command to see the version of Junos OS for EX Series
switches loaded on the switch.
Line Card Components
The EX9200-2C-8XS line card has:
•
Two CFP ports, each of which can house CFP transceivers. These ports support
100GBASE-LR4 and 100GBASE-SR10 transceivers.
•
Eight SFP+ ports, each of which can house SFP+ transceivers. These ports support
10GBASE-SR, 10GBASE-LR, 10GBASE-ER, and 10GBASE-ZR transceivers.
•
Two dust covers for the two CFP ports and eight dust covers for the eight SFP+ ports
•
Line card LED—An LED labeled OK/FAIL indicates the status of the line card. See Line
Card LED in an EX9200 Switch.
•
Network port LED—One LED on each network port indicates the link activity of the port.
See “Network Port LEDs in an EX9200 Switch” on page 15.
The ports are divided into two port groups. The four SFP+ ports labeled 0/0 through 0/3
and the CFP port labeled 1/0 form one port group. The four SFP+ ports labeled 2/0
through 2/3 and the CFP port labeled 3/0 form the other port group. The ports in each
Copyright © 2016, Juniper Networks, Inc.26
Hardware Topics for Aloha Line Card