Juniper EX9200 User Manual

Table 25: Optical Interface Support for CFP Transceivers in EX9200 Switches
ValueSpecificationEthernet Standard
CFP-100GBASE-SR10Model number100GBASE-SR10
MultimodeOptical interface
100 GbpsRate
IEEE 802.3ba—2010Standard
840 nm through 860 nmTransmitter wavelength
–7.6 dBm through 2.4 dBmAverage launch power
–9.5 dBm through 2.4 dBm for OM3
–9.1 dBm through 2.4 dBm for OM4
Average receive power
2.4 dBmReceiver saturation
–9.5 dBm for OM3
–9.1 dBm for OM4
Receiver sensitivity
MMFFiber type
OM3Fiber grade
100 m (328 ft)Distance
Not availableDOM support
Junos OS for EX Series switches, Release 13.2R1 or
later
Software required
Copyright © 2016, Juniper Networks, Inc.60
Hardware Topics for Aloha Line Card

Juniper EX9200 Specifications

General

Brand	Juniper
Model	EX9200
Category	Network Router
Language	English