Juniper EX9200

Table 40: CLI Equivalents of Terms Used in Documentation for EX9214 Switches (continued)
Additional Information
Item in
DocumentationValue (CLI)Description (CLI)
Hardware
Item (CLI)
Switch Fabric Module in
an EX9200 Switch
SF modulen is a value in the range of
0–2.
Multiple line items appear in
the CLI if more than one
Switch Fabric modules (SF
modules) are installed in the
chassis.
CB0, CB1, and CB2 stand for
SF modules.
EX9200-SCBECB (n)
•
EX9200-2C-8XS Line
Card on page 25
•
EX9200-4QS Line
Card on page 32
•
EX9200-6QS Line
Card on page 34
•
EX9200-MPC Line
Card on page 3
•
EX9200-32XS Line
Card on page 27
•
EX9200-40T Line
Card on page 31
•
EX9200-40F Line
Card on page 28
•
EX9200-40F-M Line
Card on page 30
Line card (The switch
does not have actual
FPCs—the line cards are
the FPC equivalents on
the switch.)
n is a value in the range of
0–11. The value corresponds
to the line card slot number
in which the line card is
installed.
Abbreviated name of
the line card
One of the following:
•
EX9200-2C-8XS
•
EX9200 4x40G
QSFP
•
EX9200
24x10GE+6x40GE
•
EX9200-MPC
•
EX9200 32x10G SFP
•
40x 1GE RJ45
•
EX9200-40x1G-SFP
•
EX9200-40FE
FPC (n)
•
EX9200-2C-8XS Line
Card on page 25
•
EX9200-4QS Line
Card on page 32
•
EX9200-6QS Line
Card on page 34
•
EX9200-MPC Line
Card on page 3
•
EX9200-32XS Line
Card on page 27
•
EX9200-40T Line
Card on page 31
•
EX9200-40F Line
Card on page 28
•
EX9200-40F-M Line
Card on page 30
Line card
NOTE:
The switch does not
have actual MICs except
in the EX9200-MPC line
card—the line cards are
the MIC equivalents on
the switch.
EX9200-MPC is a
modular line card that
accepts any of the
following MICs:
•
EX9200-10XS-MIC
•
EX9200-20F-M-MIC
•
EX9200-40T-MIC
n is a value in the range of
0–1.
Abbreviated name of
the Modular Interface
Card (MIC)
One of the following if
EX9200-MPC line card
is installed:
•
10X10GE SFPP
•
20X1GE SFP
MACSEC
•
40x 1GE RJ45
MIC (n)
101Copyright © 2016, Juniper Networks, Inc.
Chapter 5: Updated EX9214 Topics