Juniper EX9200

Table 23: Optical Interface Support for SFP+ Transceivers in EX9200 Switches (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-SRModel number10GBASE-SR
10 GbpsRate
LCConnector type
DualFiber count
850 nmTransmitter wavelength
–7.3 dBmMinimum launch power
–1 dBmMaximum launch power
–9.9 dBmMinimum receiver sensitivity
–1 dBmMaximum input power
MMFFiber type
50/125
µm
50/125
µm
50/125
µm
62.5/125
µm
62.5/125
µm
Core/Cladding size
OM3OM2–OM1FDDIFiber grade
1500
MHz/km
500
MHz/km
400
MHz/km
200
MHz/km
160
MHz/km
Modal bandwidth
300 m
(984ft)
82 m
(269ft)
66 m
(216ft)
33 m
(108 ft)
26 m
(85 ft)
Distance
AvailableDOM support
Junos OS for EX Series switches, Release 12.3R2 or
later
Software required
53Copyright © 2016, Juniper Networks, Inc.
Chapter 2: Updated Common EX9200 Topics