Juniper SRX550 - Maintaining Components; Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway Hardware Components; Routine Maintenance Procedures for the SRX550 High Memory Services; Gateway

CHAPTER 19
Maintaining Components
•
Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway
Hardware Components on page 143
•
Routine Maintenance Procedures for the SRX550 High Memory Services
Gateway on page 143
•
Maintaining the SRX550 High Memory Services Gateway Cooling System
Components on page 144
•
Maintaining the SRX550 High Memory Services Gateway Power Supply on page 144
Required Tools and Parts for Maintaining the SRX550 High Memory Services Gateway
Hardware Components
The following tools and parts are required to maintain the hardware components of the
services gateway:
•
Electrostatic bag or antistatic mat
•
Electrostatic discharge (ESD) grounding wrist strap
•
Flat-blade screw-blade screwdriver, approximately 1/8 in. (3 mm)
•
Phillips (+) screwdrivers, number 1 and number 2
Related
Documentation
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway on
page 143
•
• Maintaining the SRX550 High Memory Services GatewayCooling System Components
on page 144
• Maintaining the SRX550 High Memory Services Gateway Power Supply on page 144
Routine Maintenance Procedures for the SRX550 High Memory Services Gateway
For optimum performance of the services gateway, perform the following preventive
maintenance procedures regularly:
•
Inspect the installation site for moisture, loose wires or cables, and excessive dust.
143Copyright © 2016, Juniper Networks, Inc.