CHAPTER 20
Troubleshooting Components
•
Troubleshooting with the CLI on the SRX550 High Memory Services Gateway on page 145
•
Troubleshooting with LEDs on the SRX550 High Memory Services Gateway on page 146
•
Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 High
Memory Services Gateway on page 148
•
Troubleshooting the Power System on the SRX550 High Memory Services
Gateway on page 150
•
Using the RESET CONFIG Button on the SRX550 High Memory Services
Gateway on page 153
•
Changing the RESET CONFIG Button Behavior on the SRX550 High Memory Services
Gateway on page 154
•
Resetting the SRX550 High Memory Services Gateway on page 154
•
Juniper Networks Technical Assistance Center on page 155
Troubleshooting with the CLI on the SRX550 High Memory Services Gateway
The Junos OS command-line interface (CLI) is the primary tool for controlling and
troubleshooting services gateway hardware, Junos OS, routing protocols, and network
connectivity. The CLI commands display information from routing tables, information
specific to routing protocols, and information about network connectivity derived from
the ping and trace route utilities.
You need to enter the CLI commands on one or more external management devices
connected to the services gateway to display the information.
Related
Documentation
SRX550 High Memory Services Gateway Front Panel on page 14•
• Troubleshooting with LEDs on the SRX550 High Memory Services Gatewayon page 146
• Troubleshooting with Chassis and Interface Alarm Messages on the SRX550 High
Memory Services Gateway on page 148
• Troubleshooting the Power System on the SRX550 High Memory Services Gateway
on page 150
• Changing the RESET CONFIG Button Behavior on the SRX550 High Memory Services
Gateway on page 154
145Copyright © 2016, Juniper Networks, Inc.
To Next Page
Loading...
