Juniper SRX550 - Cable Specifications and Pinouts; Chapter 10 Cable Specifications and Pinouts; Interface Cabling and Wiring Specifications for the SRX550 High Memory Services Gateway

CHAPTER 10
Cable Specifications and Pinouts
•
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway on page 69
•
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Ethernet
Port on page 70
•
RJ-45 Connector Pinouts for the SRX550 High Memory Services Gateway Console
Port on page 71
•
EIA-530A DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 72
•
EIA-530A DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 73
•
RS-232 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 74
•
RS-232 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 75
•
RS-422/449 (EIA-449) DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 76
•
RS-422/449 (EIA-449) DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface
Module on page 78
•
V.35 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 80
•
V.35 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 81
•
X.21 DCE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 82
•
X.21 DTE Cable Pinouts for the 1-Port Serial Mini-Physical Interface Module on page 83
Interface Cabling and Wiring Specifications for the SRX550 High Memory Services
Gateway
The network interfaces supported on the services gateway accept different kinds of
network cables. Table 33 on page 70 lists the specifications for the cables that connect
to ports on the services gateway.
69Copyright © 2016, Juniper Networks, Inc.