Juniper SRX550 - Overview of Replacing Components; Required Tools and Parts for Replacing Hardware Components on the SRX550 High Memory Services Gateway; Table 62: Tools and Parts Required for Replacing Services Gateway Hardware; Chapter 21 Overview of Replacing Components

CHAPTER 21
Overview of Replacing Components
•
Required Tools and Parts for Replacing Hardware Components on the SRX550 High
Memory Services Gateway on page 159
Required Tools and Parts for Replacing Hardware Components on the SRX550 High
Memory Services Gateway
The tools and parts required for replacing various hardware components are listed in
Table 62 on page 159.
Table 62: Tools and Parts Required for Replacing Services Gateway
Hardware Components
ComponentsTool or Part
Cables and connectors3/8 in. nut driver or pliers
Power supply
Mini-PIMs
GPIMs
Blank panels (if component is
not reinstalled)
Mini-PIMs
GPIMs
Electrostatic bag or antistatic
mat
AllElectrostatic discharge (ESD)
grounding wrist strap
Cables and connectorsFlat-blade (–) screwdriver
Cables and connectors
Blank panels
GPIMs
Mini-PIMs
Phillips (+) screwdrivers,
numbers 1 and 2
Cables and connectorsWire cutters
Related
Documentation
• Replacing the AC Power Supply on the SRX550 High Memory Services Gateway on
page 161
159Copyright © 2016, Juniper Networks, Inc.