gateway to ground. Additional grounding is provided to an AC-powered services gateway
when you plug its power supply into a grounded AC power receptacle.
Related
Documentation
SRX550 High Memory Services Gateway Description on page 3•
• SRX550 High Memory Services Gateway Front Panel on page 14
• SRX550 High Memory Services Gateway Back Panel on page 19
• Grounding the SRX550 High Memory Services Gateway on page 106
• General Electrical Safety Guidelines and Warnings on page 211
SRX550 High Memory Services Gateway Front Panel
Figure 2 on page 14 shows the front panel of the SRX550 High Memory Services Gateway.
Figure 2: SRX550 High Memory Services Gateway Front Panel
g009059
1 2 3 4 5 6 7
891113
1012
Table 6 on page 14 provides information about the front panel components of the services
gateway with reference to Figure 2 on page 14.
Table 6: SRX550 High Memory Services Gateway Front Panel Components
DescriptionLocationComponentNumber
Indicate the current status of the services gateway. See
“SRX550 High Memory Services Gateway Front Panel LEDs”
on page 17 for detailed information about the front panel
LEDs.
Left side of the
front chassis panel
Front panel LEDs1
Connects a laptop to the services gateway for CLI
management. The port uses an RJ-45 serial connection, is
configured as data terminal equipment (DTE), and supports
the RS-232 (EIA-232) standard.
Left side of the
front chassis panel
Serial Console Port2
Copyright © 2016, Juniper Networks, Inc.14
SRX550 High Memory Services Gateway Hardware Guide
To Next Page
Loading...
