Juniper SRX550 - 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications; Table 13: 8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications

Table 12: 8-Port Gigabit Ethernet SFP XPIM Supported
Modules (continued)
CableConnector Type (SFP Transceiver)Juniper Product Number
LC1000BASE-BX10, at 10 km (TX 1490 nm / RX
1310 nm)
EX-SFP-GE10KT14R13
LC1000BASE-BX10, at 10 km (TX 1550 nm / RX
1310 nm)
EX-SFP-GE10KT15R13
LC100Base-BX Fast Ethernet Optics, at 20 km
(TX 1310 nm / RX 1550 nm)
EX-SFP-FE20KT13R15
LC100Base-BX Fast Ethernet Optics, at 20 km
(TX 1550 nm / RX 1310 nm)
EX-SFP-FE20KT15R13
LC1000BASE-BX, at 40 km (TX 1310 nm / 1550
nm)
EX-SFP-GE40KT13R15
LC1000BASE-BX, at 40 km (TX1550 nm / RX1310
nm)
EX-SFP-GE40KT15R13
8-Port Gigabit Ethernet SFP XPIM Network Interface Specifications
Table 13 on page 28 provides the network interface specifications of the 8-Port Gigabit
Ethernet small form-factor pluggable XPIM (SFP XPIM).
Table 13: 8-Port Gigabit Ethernet SFP XPIM Network Interface
Specifications
ValueNetwork Interface Specification
Full-duplex and half-duplexOperating modes
10/100/1000 MbpsOperating speed
802.1Q virtual LANsVLAN support
SupportedClass-of-service support
DIX, LLC/SNAP, CCC, TCC, and VLAN-CCCEncapsulations
SupportedLoopback diagnostic feature
SupportedAutonegotiation
Related
Documentation
SRX550 High Memory Services Gateway Gigabit-Backplane Physical Interface Modules
Overview on page 23
•
• 16-Port Gigabit Ethernet XPIM (PoE) on page 29
Copyright © 2016, Juniper Networks, Inc.28
SRX550 High Memory Services Gateway Hardware Guide